PRODUCT CENTER
CONTACT US
If you are interested in cooperation, please contact us immediately, we will give you feedback as soon as possible!
Mobile
7075 aluminum alloy is a cold - treated forging alloy, high strength, far better than mild steel.
7075 is one of the strongest alloys commercially available. Under heat treatment, can achieve very high strength characteristics.
7075 materials are generally added a small amount of copper, chromium and other alloys, the department of 7075-T651 aluminum alloy is particularly top grade, known as the best aluminum alloy products, high strength, far better than any mild steel. The alloy also has good mechanical properties and anode reaction.
VIEW MORE +
7075 is one of the strongest alloys commercially available. Under heat treatment, can achieve very high strength characteristics.
7075 materials are generally added a small amount of copper, chromium and other alloys, the department of 7075-T651 aluminum alloy is particularly top grade, known as the best aluminum alloy products, high strength, far better than any mild steel. The alloy also has good mechanical properties and anode reaction.
2024 aluminum alloy, the main alloying elements are copper and magnesium.
Applications where high strength but low weight ratio is required, and good fatigue strength.
Not weldable, general processing performance.
Because of poor corrosion resistance, aluminum-zinc splints are often used as protection, which results in reduced fatigue strength.
VIEW MORE +
Applications where high strength but low weight ratio is required, and good fatigue strength.
Not weldable, general processing performance.
Because of poor corrosion resistance, aluminum-zinc splints are often used as protection, which results in reduced fatigue strength.
The main alloying elements in 6061 alloy are magnesium and silicon, which have moderate strength, good corrosion resistance, weldability and good oxidation effect.
Widely used in various industrial structural parts requiring a certain strength and high antibiotic corrosion, its main chemical composition: Cu:0.15-0.4; Si: 0.4-0.8; Fe: 0.7 -; Mn: 0.15; Mg: 0.8-1.2; Zinc: 0.25; Cr: 0.04-0.35; Ti: 0.15 -; 6061 aluminum plate its state T6 and T651 difference is that in general, T6 internal stress will be relatively large, processing will be deformed, the most suitable for processing state should be T651, he is on the basis of T6 tensile, eliminate internal stress.
VIEW MORE +
Widely used in various industrial structural parts requiring a certain strength and high antibiotic corrosion, its main chemical composition: Cu:0.15-0.4; Si: 0.4-0.8; Fe: 0.7 -; Mn: 0.15; Mg: 0.8-1.2; Zinc: 0.25; Cr: 0.04-0.35; Ti: 0.15 -; 6061 aluminum plate its state T6 and T651 difference is that in general, T6 internal stress will be relatively large, processing will be deformed, the most suitable for processing state should be T651, he is on the basis of T6 tensile, eliminate internal stress.
6082 is a heat-treatable alloy with good formability, weldability, machinability and corrosion resistance.
It also has moderate strength and can maintain good operability after annealing.
It is mainly used in mechanical structure, including bars, plates, pipes and profiles.
VIEW MORE +
It also has moderate strength and can maintain good operability after annealing.
It is mainly used in mechanical structure, including bars, plates, pipes and profiles.
Thickness: 0.15-150mm
Port of Destination: Any port you like
Aluminium Sheets with high strength is mainly used make Fire Engine Side Panel and Dump Truck Floor in industry.
Because of its good energy absorption ability in collision experiment, engine mount, side impact beam, engine splash shield, ABS, airbag part, etc.
VIEW MORE +
Port of Destination: Any port you like
Aluminium Sheets with high strength is mainly used make Fire Engine Side Panel and Dump Truck Floor in industry.
Because of its good energy absorption ability in collision experiment, engine mount, side impact beam, engine splash shield, ABS, airbag part, etc.
Aluminium Pipe can be produced in two types drawn and extruded aluminum pipe.
Extruded aluminum pipe is stocked in both seamless and structural (port-hole die).
Aluminium pipe is used in pressure or structural application.
These Aluminium Pipe are light weight, excellent corrosion resistance, and the ability to transmit heat rapidly are only a few of the benefits of aluminum pipes.
VIEW MORE +
Extruded aluminum pipe is stocked in both seamless and structural (port-hole die).
Aluminium pipe is used in pressure or structural application.
These Aluminium Pipe are light weight, excellent corrosion resistance, and the ability to transmit heat rapidly are only a few of the benefits of aluminum pipes.
CONTACT US
Email : alicewang@spjmetal.com
WhatsApp : +8613066028901
Tel : +8613066028901
Add : Building 8, Row 3, East District, Kuangshan Village, Huaiyin District, Jinan City, Shandong Province
GET A FREE QUOTE
Copyright : Shandong Sipujia Metal Materials Co., Ltd. Powerby : 300.cn jinan2 Seo Tags BUSINESS LICENSE
SAF Coolest v1.3.1.2 设置面板 BAPSD-ZEDP-PASDE-ZFF
图片ALT信息: Shandong Sipujia Metal Materials Co., Ltd.