PRODUCT CENTER
CONTACT US
If you are interested in cooperation, please contact us immediately, we will give you feedback as soon as possible!
Mobile
The main alloying elements in 6061 alloy are magnesium and silicon, which have moderate strength, good corrosion resistance, weldability and good oxidation effect.
Widely used in various industrial structural parts requiring a certain strength and high antibiotic corrosion, its main chemical composition: Cu:0.15-0.4; Si: 0.4-0.8; Fe: 0.7 -; Mn: 0.15; Mg: 0.8-1.2; Zinc: 0.25; Cr: 0.04-0.35; Ti: 0.15 -; 6061 aluminum plate its state T6 and T651 difference is that in general, T6 internal stress will be relatively large, processing will be deformed, the most suitable for processing state should be T651, he is on the basis of T6 tensile, eliminate internal stress.
VIEW MORE +
Widely used in various industrial structural parts requiring a certain strength and high antibiotic corrosion, its main chemical composition: Cu:0.15-0.4; Si: 0.4-0.8; Fe: 0.7 -; Mn: 0.15; Mg: 0.8-1.2; Zinc: 0.25; Cr: 0.04-0.35; Ti: 0.15 -; 6061 aluminum plate its state T6 and T651 difference is that in general, T6 internal stress will be relatively large, processing will be deformed, the most suitable for processing state should be T651, he is on the basis of T6 tensile, eliminate internal stress.
5754 aluminum alloy is a typical al-Mg alloy with moderate strength, good corrosion resistance, weldability and easy to be formed.
In foreign countries, 5754 aluminum alloy sheet with different heat treatment status is the main material used in automobile manufacturing industry (car doors, molds, seals) and can industry.
VIEW MORE +
In foreign countries, 5754 aluminum alloy sheet with different heat treatment status is the main material used in automobile manufacturing industry (car doors, molds, seals) and can industry.
6061 is a common duralumin with good machinability and moderate strength.
6061 is a heat-treatable alloy with good formability, weldability, machinability, and moderate strength.
It can still maintain good operation after annealing.
VIEW MORE +
6061 is a heat-treatable alloy with good formability, weldability, machinability, and moderate strength.
It can still maintain good operation after annealing.
A finished Aluminium product such as strip which has been wound or coiled after rolling.
These Aluminium Strips are available in Al 99.5 and E-Al 99.7 pure aluminium 1050, 1060, 1070, 1100, 1145, 1200, 1350, 2024, 3003, 3004, 3005, 3104, 5005, 5050, 5052, 5056, 5182, 5252, 5657, 5754, 6061, 7075, 8006, 8011, 8079, 9020.
Re-rolled aluminum strip available in a wide range of precise thickness and width capabilities for consistent and tight gauge tolerances.
VIEW MORE +
These Aluminium Strips are available in Al 99.5 and E-Al 99.7 pure aluminium 1050, 1060, 1070, 1100, 1145, 1200, 1350, 2024, 3003, 3004, 3005, 3104, 5005, 5050, 5052, 5056, 5182, 5252, 5657, 5754, 6061, 7075, 8006, 8011, 8079, 9020.
Re-rolled aluminum strip available in a wide range of precise thickness and width capabilities for consistent and tight gauge tolerances.
7075-T6 aluminum alloy hardness is 150HB, belongs to the high hardness aluminum alloy.
7075T6 aluminum alloy is precision machined aluminum in the United States, one of the most commercially available alloys.
The main alloying element of 7075 series is zinc, which has strong strength, good mechanical properties and anode reaction.
VIEW MORE +
7075T6 aluminum alloy is precision machined aluminum in the United States, one of the most commercially available alloys.
The main alloying element of 7075 series is zinc, which has strong strength, good mechanical properties and anode reaction.
Thickness: 0.2-10mm
Port of Destination: Any port you like
Application:Aluminum tread plates according to the different classification of aluminum sheet alloy
In accordance with the different patterns of aluminum plate classification: pattern plate has a bar, two bars, three bars and five bars.
VIEW MORE +
Port of Destination: Any port you like
Application:Aluminum tread plates according to the different classification of aluminum sheet alloy
In accordance with the different patterns of aluminum plate classification: pattern plate has a bar, two bars, three bars and five bars.
CONTACT US
Email : alicewang@spjmetal.com
WhatsApp : +8613066028901
Tel : +8613066028901
Add : Building 8, Row 3, East District, Kuangshan Village, Huaiyin District, Jinan City, Shandong Province
GET A FREE QUOTE
Copyright : Shandong Sipujia Metal Materials Co., Ltd. Powerby : 300.cn jinan2 Seo Tags BUSINESS LICENSE
SAF Coolest v1.3.1.2 设置面板 BAPSD-ZEDP-PASDE-ZFF
图片ALT信息: Shandong Sipujia Metal Materials Co., Ltd.